RTM vs RPM: Which Remote Monitoring Program Fits Your Patients?

Remote physiologic monitoring and remote therapeutic monitoring look alike on a claim, but they measure different things, suit different care teams and cannot be billed together. How to pick one per patient, and what the software has to record for each.

In short

  • RPM tracks physiologic data such as blood pressure, oxygen saturation, blood sugar and weight, collected automatically, while RTM tracks non-physiologic data about the respiratory or musculoskeletal system, therapy adherence and therapy response, and that data can be self-reported.
  • Medicare does not pay for both programs for the same patient in the same period, and only one practitioner can bill remote monitoring per patient in a 30-day period, so the program is chosen patient by patient.
  • The right program follows from what you measure and who manages the patient: a physician-led chronic disease program usually fits RPM, while a therapist-led rehab or respiratory therapy program usually fits RTM.

Choose remote physiologic monitoring (RPM) when you need to watch a body measurement, such as blood pressure, oxygen saturation, blood sugar or weight, that a connected device collects and sends on its own. Choose remote therapeutic monitoring (RTM) when you need to watch how a treatment is going: the state of the patient's respiratory or musculoskeletal system, whether they follow the therapy, and how they respond to it. RTM data can be self-reported. RPM data cannot. Medicare does not pay for both for the same patient at the same time, and only one practitioner can bill remote monitoring per patient in a 30-day period. So the decision is which program each patient belongs in, and who on the care team will run it.

For the full list of RPM billing conditions and the checks a claim engine should run, see our separate article on RPM billing codes.

What is the difference between RTM and RPM?

CMS's December 2025 Medicare Learning Network booklet, MLN901705, treats both as forms of remote monitoring: the patient collects their own health data with a connected medical device, the device transmits it, and the provider uses it to treat or manage a condition. The difference is the kind of data.

RTM and RPM compared
QuestionRPMRTM
What it tracksBlood pressure, oxygen saturation, blood sugar, weightRespiratory or musculoskeletal data, therapy adherence and response
Self-reported dataNo, collected and sent automaticallyYes, sent by a connected device
Who runs itE/M-eligible physicians and practitionersTherapists under a plan of care, also physicians and NPs
Treatment management codes99457, 9945898979, 98980, 98981
Established patientRequiredRequired from 2027
Billed with the otherNoNo
  • RPM uses non-face-to-face technology to monitor and analyze physiological metrics. The booklet's examples are oxygen saturation, blood pressure, blood sugar or blood oxygen levels, and weight loss or gain.
  • RTM captures non-physiological data related to a therapeutic treatment. That includes data on the patient's musculoskeletal or respiratory system, and RTM can also monitor treatment adherence and treatment response.
  • RTM data can be self-reported, but a connected medical device still transmits it. For RPM, CMS's CY 2021 rule says the data must be collected and transmitted automatically rather than self-reported.

For example, a blood pressure cuff that uploads every reading is RPM. A patient logging home exercises and pain levels after knee surgery, through a device that sends the log to their therapist, points to RTM.

Which codes belong to each program?

CPT codes and their descriptors belong to the American Medical Association, so read the current descriptors before you build rules around them. CMS documents name these codes:

  • RPM: CMS's CY 2021 rule addressed CPT codes 99453, 99454, 99091, 99457 and 99458. MLN901705 names 99457 and 99458 as treatment management codes, and says RPM data must be collected for 2 to 15 or 16 or more days out of 30, depending on the code descriptor.
  • RTM set-up: 98975, initial set-up and patient education on use of equipment, according to CMS's 2022 therapy code list transmittal.
  • RTM device supply: 98976 for the respiratory system and 98977 for the musculoskeletal system. From January 1, 2026, CMS's MM14250 article gives these descriptors as 16 to 30 days in a 30-day period, and adds 98984 (respiratory) and 98985 (musculoskeletal) for 2 to 15 days.
  • RTM treatment management: 98980 for the first 20 minutes in a calendar month and 98981 for each additional 20 minutes, both requiring at least one interactive communication with the patient or caregiver. From 2026, 98979 covers the first 10 minutes, with at least one real-time interactive communication.

Two details affect the software. RTM device codes are split by body system, so every device or app in your catalog needs a body system field. And both programs now have short-period codes, so a single data-day threshold no longer works for either.

Who can run each program?

This is often the deciding factor, because the two programs grew out of different parts of Medicare.

RPM

MLN901705 says only physicians and non-physician practitioners eligible to provide evaluation and management (E/M) services can bill remote monitoring services, and that auxiliary personnel can provide them under the billing practitioner's general supervision. RPM also requires an established patient relationship. The CY 2021 rule adds that auxiliary personnel may include contracted employees.

RTM

CMS designated the RTM codes as "sometimes therapy" codes. The 2022 transmittal describes RTM treatment management as provided remotely to patients in their homes by therapists in private practice or facility-based therapists, such as those in rehab agencies. MM14250 says therapists always provide RTM under a therapy plan of care with a GP, GO or GN modifier. Physicians, physician assistants, nurse practitioners and clinical nurse specialists also provide RTM under a therapy plan of care when it relates to the musculoskeletal device codes 98977 and 98985, and otherwise outside one.

Supervision of therapy assistants changed after the codes launched. CMS's CY 2024 rule allowed physical and occupational therapists in private practice to supervise therapy assistants generally, rather than directly, for RTM. MM14250 adds that 98975, 98979, 98980 and 98981 fall under the de minimis standard and need the CQ or CO modifier when a physical therapist assistant or occupational therapy assistant furnishes them in whole or in part.

If therapists will bill RTM in your program, ask your Medicare Administrative Contractor how the booklet's E/M eligibility line and the therapy code list apply to your setting, and put the answer in your billing rules.

Can a patient be on RPM and RTM at the same time?

Not for billing. MLN901705 lists these rules for the same patient:

  • You can't bill remote physiologic monitoring and RTM together.
  • Only one practitioner can bill remote monitoring per patient in a 30-day period.
  • Either RPM or RTM, but not both, may be billed alongside chronic care management, transitional care management, behavioral health integration, principal care management and chronic pain management, as long as time and effort are not counted twice.
  • During a global surgery period, remote monitoring may be billed if it addresses an underlying condition not linked to the procedure. Check this before you design a post-surgical program.

A patient with heart failure who is also doing pulmonary rehab may benefit clinically from both kinds of data. Your system can collect both. It just has to bill one program per period and make that choice visible to staff before the period starts.

Which program fits which patient?

  • The measurement is a vital sign or body metric, collected by a device that uploads it without patient input: RPM.
  • The measurement is about therapy, such as exercise adherence, pain with movement, inhaler use or symptom scores: RTM.
  • A physician or nurse practitioner manages the condition and reviews the data: either can work, so decide by the data type.
  • A physical or occupational therapist leads the care under a therapy plan of care: RTM, since RPM billing is tied to E/M-eligible practitioners.
  • The patient is new to the practice: until 2027 this pointed to RTM, because only RPM required an established patient. That changes in 2027, as the next section explains.
  • Some data will be typed in by the patient: that data cannot count for RPM, so either route it to an RTM program or exclude it from RPM data days.

What changes in 2027?

CMS's CY 2027 Physician Fee Schedule final rule, effective for services on or after January 1, 2027, narrows the gap between the programs:

  • RTM is limited to established patients, as RPM already was.
  • Practitioners must furnish a separately reportable initiating visit in association with the start of RPM or RTM.
  • CMS updated how both code families are valued.
  • A proposal to pay only when clinical staff employed by the practice do the work was delayed to January 1, 2029.
  • CMS did not finalize bundling the RPM and RTM codes into four new HCPCS G-codes.

For product teams, the practical result is that enrollment works the same way in both programs from 2027: an established patient, a linked initiating visit, then monitoring. Build that gate once and apply it to both.

What should the software record for each program?

A platform that supports both programs keeps them apart at the data level. These are the fields and rules that matter:

  • Program per patient per period: RPM or RTM, never both, with one named billing practitioner.
  • Source per reading: automatic device upload or patient-entered. Only automatic readings count toward RPM data days.
  • Device catalog: FDA device status, and for RTM the body system (respiratory or musculoskeletal), since the supply code depends on it.
  • Data days per 30-day period, measured against the threshold for the code you expect to bill, short or long.
  • Treatment management time per staff member, with each real-time interactive communication logged as its own event.
  • For therapists: a link to the therapy plan of care, the discipline modifier (GP, GO or GN), and whether an assistant did part of the work, for the CQ or CO modifier.
  • Concurrent care management programs and the minutes counted for each, so no minute is counted twice.
  • From 2027: the initiating visit linked to the start of monitoring.

Keep the code list and thresholds in configuration your team can change without a code release. Both families changed in 2022, 2026 and 2027, and CMS left the door open to further bundling.

In the monitoring systems we build, each clinician sees only their own patients, which also keeps the one-practitioner rule visible on every worklist. We sign a BAA before anyone on the team sees PHI, and we run a penetration test before launch.

Planning an RPM or RTM program?

Talk to an engineer at Onix Health about which program fits your patients and what your software needs to record for it. Our free five-day technical audit ends with a written report on how your current system handles program choice, data days and time.