RPM CPT Codes and Medicare Billing Rules: What Your Software Must Track

Medicare pays for remote patient monitoring through codes for setup, device supply and treatment management, each with its own rules. The codes CMS names, the conditions behind every claim, what changes in 2027, and the checks a billing engine should run before a claim goes out.

In short

  • Medicare pays for remote physiologic monitoring in three parts: patient education and device setup, device supply with data transmission, and treatment management time, billed with CPT codes such as 99453, 99454, 99457 and 99458.
  • Every claim depends on conditions your software has to record: an established patient, consent, an FDA-defined device that uploads data automatically, a minimum number of data days, the required real-time interactive communication, and only one billing practitioner per patient in a 30-day period.
  • From 2027, CMS requires a separately reportable initiating visit at the start of RPM, and it has delayed to 2029 a proposal to pay only when the clinical staff are employed by the practice.

Medicare pays for remote physiologic monitoring (RPM) in three parts: patient education and device setup, device supply with data transmission, and treatment management, meaning the time staff spend reviewing data and talking with the patient. CMS's CY 2021 rule clarified payment for CPT codes 99453, 99454, 99091, 99457 and 99458, and its current Medicare Learning Network booklet names 99457 and 99458 as the RPM treatment management codes. Each code comes with conditions: an established patient, consent, a device that meets the FDA definition of a medical device and uploads data automatically, a minimum number of days with data, real-time communication with the patient, and one billing practitioner per patient per 30 days. Billing software has to record each condition as it happens, because none of them can be rebuilt reliably at month end.

Which RPM codes does Medicare recognize?

CMS's December 2025 booklet, MLN901705, describes remote monitoring as three components, each building on the one before: patient education and device setup, so the patient knows how to use the device and collect data accurately; device supply, including connecting the device and how often the patient should use it; and treatment management, meaning review of the patient's data to improve outcomes. The CY 2021 rule attached different conditions to different codes:

  • 99453 and 99454: the codes tied to the data-day requirement. Auxiliary personnel may provide these services incident to the billing practitioner's services and under their supervision.
  • 99457 and 99458: the treatment management codes. They carry the 20-minute time requirement and the requirement for real-time interactive communication.
  • 99091: the fifth code the rule addressed. The fact sheet does not describe it, so check its current descriptor before combining it with the others.

For 2026, the CPT code set added codes for shorter monitoring periods. MLN901705 says data must be collected for 2 to 15 or 16 or more days out of 30, depending on the code descriptor, and that this day count does not apply to the treatment management codes 98980, 98981, 99457 and 99458. The first two of those are remote therapeutic monitoring codes. CPT codes and descriptors are maintained by the American Medical Association, so read the current descriptors before you write billing rules around a code.

What must be true before the first RPM claim?

MLN901705 lists the conditions. Each one becomes a field, a document or a check in your system.

  • An established patient relationship. The booklet says this applies to remote physiologic monitoring but not to remote therapeutic monitoring.
  • A billing practitioner who is a physician or non-physician practitioner eligible to provide evaluation and management services.
  • An acute or chronic condition being monitored, and monitoring that is medically reasonable and necessary.
  • Patient consent, which CMS requires at the time RPM services are provided. Auxiliary staff under general supervision can obtain it.
  • Physiologic data collected electronically and uploaded automatically to a secure location where the billing practitioner can analyze and interpret it. The CY 2021 rule adds that the data may not be self-reported.
  • A device that meets the FDA definition of a medical device.

How do data days work?

Under the CY 2021 rule, 16 days of data had to be collected and transmitted in each 30 days to bill 99453 and 99454. The 2026 code changes allow shorter periods for some codes, 2 to 15 days, while others still need 16 or more. Either way, the software needs a precise definition of a data day and a consistent 30-day period per patient.

  • Count distinct calendar days with at least one valid, automatically transmitted reading; several readings on one day still count as one day.
  • Start each patient's 30-day period on a defined date, such as the first day of device use, and store it.
  • Exclude manually entered values from the count, since self-reported data does not qualify.
  • Show each patient's count against the threshold for the code you expect to bill, early enough for staff to remind the patient.

How is treatment management time counted?

Treatment management is billed on staff time, separately from data days, so the system tracks two different things per patient, each over the period the current code descriptor sets. The CY 2021 rule says the 20 minutes of time required to bill 99457 and 99458 can include care management time as well as time spent in interactive communication. That communication is a real-time, synchronous, two-way conversation, which can be supplemented with video or other data. The rule calls this interactive communication required for these codes.

  • Log time from the actions staff take in the system, such as reviewing readings, calling the patient or adjusting a care plan, with the staff member and the start and end of each activity.
  • Record each real-time conversation as its own event, with date, participants and channel.
  • Show progress toward each time threshold in the current descriptors while the billing period is still open.
  • Never count the same minutes toward two programs, such as RPM and chronic care management.

Who can do the work?

Auxiliary personnel can provide remote monitoring services under the general supervision of the billing practitioner, according to MLN901705. The CY 2021 rule said staff, including contracted employees, may furnish 99453 and 99454 incident to the billing practitioner's services and under their supervision.

That may change. In the CY 2027 final rule, CMS delayed to January 1, 2029 a proposal to pay for RPM and RTM only when the clinical staff are employed by the practice rather than contracted. If your program relies on contracted staff, record each staff member's employment type now, so you can report on it when the rule takes effect.

What can be billed for the same patient in the same period?

  • Only one practitioner can bill remote monitoring for a patient in a 30-day period. Your system needs one named billing practitioner per patient per period.
  • Remote physiologic monitoring and remote therapeutic monitoring cannot be billed together.
  • RPM or RTM, but not both, may be billed in the same period as chronic care management, transitional care management, behavioral health integration, principal care management or chronic pain management, as long as time and effort are not counted twice.
  • For a patient in a global surgery period, remote monitoring may be billed if it addresses an underlying condition not linked to the procedure.

Home health agencies follow a different path. Under MLN901705, they report remote monitoring on home health claims with HCPCS code G0322, as a single line showing the start date and the number of monitoring days. If your software serves both physician practices and home health agencies, keep the two billing paths separate.

What changes in 2027?

CMS's CY 2027 Physician Fee Schedule final rule, effective for services on or after January 1, 2027, finalized these remote monitoring changes:

  • RTM services are furnished only to established patients.
  • Practitioners reporting RPM or RTM must furnish a separately reportable initiating visit in association with the start of the services.
  • CMS updated how RPM and RTM services are valued.
  • The employed clinical staff requirement was delayed to January 1, 2029.
  • CMS did not finalize bundling the RPM and RTM codes into four new HCPCS G-codes, and may consider the comments in future rulemaking.

For the software, the initiating visit is the change with the most work. Enrollment should require a linked visit record before monitoring starts, and the claim check should confirm it.

Where should payment rates live?

Keep them out of the code, because CMS changes values every year. In the CY 2026 final rule, it finalized the use of hospital outpatient data in setting rates for some remote monitoring services, and the CY 2027 rule updated valuation again. The CMS Physician Fee Schedule Look-Up Tool shows payment amounts and relative value units by code, nationally or for a specific Medicare Administrative Contractor and locality. Store rates as data your billing team can update each January, keyed by code, year and locality.

Which checks should run before a claim goes out?

  • Patient is established, or, from 2027, has a linked initiating visit.
  • Consent is on file with a date before or at the start of services.
  • The device is recorded with its FDA status, and every counted reading came from it automatically.
  • The data day count meets the threshold in the code descriptor for this 30-day period.
  • Treatment management minutes meet the threshold, with the required real-time interactive communication recorded.
  • No other practitioner billed remote monitoring for the patient in the same 30-day period.
  • No RTM claim for the same patient and period.
  • Minutes counted for CCM, TCM, BHI, PCM or chronic pain management are not also counted for RPM.
  • The billing practitioner is eligible to bill E/M services and supervised the staff who did the work.

A billing engine that runs these checks also gives clinicians a cleaner worklist: patients at risk of missing their data days or their interactive communication show up while there is still time to act. Our article on RPM alert fatigue covers how to keep those worklists from overwhelming the care team.

In the systems we build, each clinician sees only their own patients, which also makes the one-practitioner-per-period rule easier to hold. We sign a BAA before anyone on the team sees PHI, and we run a penetration test before launch.

Building or checking an RPM billing engine?

Talk to an engineer at Onix Health about your RPM program, your data and your claims. Our free five-day technical audit ends with a written report on where your system captures each billing condition and where it does not.