In short
- Chronic care management (CCM) is Medicare's monthly payment for managing patients with two or more chronic conditions expected to last at least 12 months, and it requires an initiating visit, documented consent, an electronic comprehensive care plan and 24/7 access to care.
- CCM codes are billed on time per calendar month, and the code depends on who did the work: clinical staff time counts toward 99490, 99439, 99487 and 99489, while 99491 and 99437 count only time the billing practitioner spends personally.
- Advanced primary care management (APCM) bundles CCM with other care management services into monthly codes that do not need minute counting, so software that supports both models lets a practice choose per patient instead of rebuilding later.
Chronic care management software has to run one monthly cycle without gaps: find eligible patients, confirm the initiating visit, record consent, keep an electronic comprehensive care plan, give patients round-the-clock access to the care team, log every minute of care management by who did it, and stop any claim that conflicts with another service. CMS's booklet MLN909188 defines CCM as managing a patient's multiple (two or more) chronic conditions expected to last at least 12 months, or until death, that place the patient at significant risk of death, acute exacerbation or decompensation, or functional decline. Every requirement below comes from that booklet unless another source is named.
Which patients qualify for CCM?
Eligible patients have two or more chronic conditions that meet the definition above. The booklet's examples include Alzheimer's disease and related dementia, arthritis, asthma, atrial fibrillation, cancer, cardiovascular disease, COPD, depression, diabetes, hypertension and substance use disorders. Practices may find candidates using criteria suggested in CPT guidance, such as the number of illnesses, the number of medications, or repeat admissions or emergency department visits.
Software can do most of this search. Run a query over the problem list, active medications and recent encounters, rank the results, and give care managers a worklist of patients to approach. Keep the final decision with a person, and record why each patient was enrolled.
Cost sharing applies to CCM, and the booklet notes that some patients have Medigap coverage to help with it. Show the patient's coverage on the worklist, since cost sharing is one of the things staff must explain at consent.
What must happen before the first month is billed?
The initiating visit
CMS requires an initiating visit for new patients and for patients the practitioner has not seen within the previous year. It must be a comprehensive face-to-face evaluation and management (E/M) visit, an annual wellness visit or an initial preventive physical exam, and CCM must be discussed during it. A visit where CCM was not discussed does not count. The initiating visit is billed separately. If the practitioner personally does extensive assessment and care planning beyond the usual effort, they may also bill HCPCS G0506 once, as part of the initiating visit.
Consent
Get the patient's written or verbal consent before billing, and document in the medical record that you told them:
- That CCM services are available.
- Their possible cost-sharing responsibilities.
- That only one practitioner can provide and bill CCM in a calendar month.
- That they can stop CCM at any time, effective at the end of the calendar month.
- That you explained all of this, and whether they accepted or declined.
Consent is needed only once unless the patient switches to a different CCM practitioner. Build the consent screen as a checklist of those five items with a single sign-off, and store the date, the method (written or verbal) and who obtained it.
What does the care plan need to hold?
CCM requires a patient-centered, electronic comprehensive care plan based on a physical, mental, cognitive, psychosocial, functional and environmental assessment, and an inventory of resources and supports. The plan may include a problem list, expected outcome and prognosis, measurable treatment goals, cognitive and functional assessment, symptom management, planned interventions, medical management, environmental evaluation, caregiver assessment, coordination with outside resources and practitioners, and periodic review.
The plan must be available promptly inside and outside the billing practice, and patients and caregivers should get a copy when needed. That rules out a plan that lives only as a PDF in one system. Store it as structured data that can be shared, printed and shown in a patient portal.
There is also a technology requirement. The patient's demographics, problems, medications and medication allergies must be recorded in a certified EHR technology version acceptable under the EHR Incentive Programs as of December 31 of the year before each payment year. Certified products are tested against criteria in the ONC Health IT Certification Program and listed on the Certified Health IT Product List. If your CCM product is a separate tool, it can read those items from the practice's certified EHR instead of becoming the record of them.
What does 24/7 access look like in software?
- Round-the-clock access to physicians, other qualified practitioners or clinical staff, so patients can discuss urgent needs at any hour. In practice this means an after-hours line that reaches someone who can see the care plan.
- A designated care team member the patient can schedule routine appointments with, who is in regular touch with them.
- A way for patients and caregivers to reach their practitioners by phone and by secure messaging, secure web or a patient portal.
The booklet also expects comprehensive care management: assessing medical, functional and psychosocial needs, timely preventive services, medication review and oversight of medication self-management, and coordination with home and community-based providers. Care transitions are part of it too, such as follow-up after an ED visit or a hospital discharge, and prompt exchange of continuity-of-care documents. Each of these becomes a task type in the care manager's worklist.
How should CCM time be tracked?
CCM codes are based on time per calendar month and on who does the work. The booklet's table:
- 99490: chronic care management by clinical staff, first 20 minutes. Add-on 99439: each additional 20 minutes.
- 99491: chronic care management by a physician or other qualified health care professional, first 30 minutes. Add-on 99437: each additional 30 minutes.
- 99487: complex chronic care management by clinical staff, first 60 minutes. Add-on 99489: each additional 30 minutes.
Codes 99490, 99439, 99487 and 99489 include time spent by the billing practitioner or clinical staff, and the practitioner's time can count toward them if it is not used to report 99491. Codes 99491 and 99437 count only time the billing practitioner spends personally. Complex CCM also requires moderate- or high-complexity medical decision-making by the billing practitioner. The clinical staff codes are assigned general supervision, so the practitioner directs the work without being physically present.
- Log each activity with the person, their role, the patient, the activity type and the start and end time.
- Tag each minute to one code family only. Time counted for CCM cannot count toward any other billed code.
- Show running totals against each threshold during the month, so staff can plan the last week.
- At month end, pick the code from the logged time and roles, and let a person review the choice before the claim.
Which services cannot be billed with CCM?
- Non-complex and complex CCM for the same patient in the same month.
- CCM in the same period as G0181 (home health care supervision), G0182 (hospice care supervision) or CPT 90951 to 90970 (certain ESRD services).
- Complex CCM and prolonged E/M services in the same month.
- RPM and RTM together. Either one, but not both, may be billed with CCM or transitional care management, as long as time is not counted twice.
CCM codes 99487, 99489, 99490 and 99491 may be reported during the 30-day transitional care management period. Patients in CMS models or demonstrations may face other limits, so store model participation on the patient record. Our comparison of RPM and RTM covers how remote monitoring sits alongside CCM.
Where does advanced primary care management fit?
APCM combines elements of principal care management, transitional care management, CCM, interprofessional consultations and online digital E/M visits into one bundle billed once per calendar month. It does not require counting minutes. The booklet lists three codes: G0556 for patients with zero or one chronic condition, G0557 for two or more, and G0558 for two or more with Qualified Medicare Beneficiary status. CMS's CY 2025 rule lists its requirements as including consent, an initiating visit, 24/7 access and continuity of care, and a patient-centered comprehensive care plan. The CY 2026 rule added three optional behavioral health add-on G-codes, billed with the APCM base code and meant to be comparable to existing collaborative care and behavioral health integration codes.
Principal care management (PCM), codes 99424 to 99427, covers a single high-risk chronic condition expected to last at least three months, with at least 30 minutes per month.
For software, this means storing the program type on each patient's monthly record instead of building a separate system per program. The consent, care plan and access features are shared. Only the billing rule changes: minutes for CCM and PCM, monthly eligibility for APCM.
What should run before the month closes?
- Initiating visit on file within the required period, with CCM discussed.
- Consent recorded with all five items, from the current CCM practitioner.
- Care plan created or reviewed per the code descriptor, and shared.
- Time totals meet the chosen code, with the right roles behind them.
- Complex CCM has the required level of medical decision-making documented.
- No conflicting service in the same period, and no minute counted twice.
- No other practitioner billing CCM for the patient this month.
In the systems we build, each clinician sees only their own patients, which keeps worklists short and the one-practitioner rule easy to see. We sign a BAA before anyone on the team sees PHI, and we run a penetration test before launch.
Building or reviewing CCM software?
Talk to an engineer at Onix Health about your CCM program and how your system handles consent, care plans and time. Our free five-day technical audit ends with a written report on each requirement and where your workflow meets it.